MK-24S_MK-24S Crawler-type Drilling Machine_Construction Machinery _Products

Products

MK-24S Crawler-type Drilling Machine

Home > Products > Construction Machinery > MK-24S Crawler-type Drilling Machine > MK-24S

MK-24S

Product Search:

Tel: 0086-731-82398696 82398695
Fax: 0086-731-82398697
Mail: international@chtcjove.com

Features
Parameters

MK-24S crawler drilling rig is a new generation of pile machinery produced exclusively by Hengtian Jiuwu Heavy Industry Co. , Ltd. . The product not only has the mobility and construction efficiency of the crawler pile frame, but also has the safety and stability of the crawler pile frame and excellent cost performance. It is widely used in all kinds of industrial and civil construction, such as pile foundation engineering, deep foundation pit supporting engineering, anti-seepage Dam engineering in flood control engineering, etc. And can be applied to long screw, diesel hammer, dth hammer and other different construction methods.

● Easy Transition. Hydraulic telescopic track design, to ensure the working state/self-walking state/road, railway transport state are safe and reliable;

● simple maintenance, cost-effective;

● stable walking, safe operation. Because the size of the ground is not limited by the chassis, and equipped with the front and rear four hydraulic outrigger, the rollover accident will not occur.

●The vertical of the column can be adjusted by adjusting the oil cylinder at the bottom of the diagonal brace, and the vertical degree of the pile is high. The vertical degree of the drilling hole is much better than that of the hanging track pile frame with three-point support and two-direction adjustment.

●There will never be a situation where the treads of the pile frame are often difficult to move because the outriggers are sinking. Construction efficiency can be increased 2-3 times, no pile dead angle.

项目 Item		参数 Parameter
适用工作装置 Apllialbe working device	液压打桩锤 Hydraulic piling hammer	5T 以下 Below
	柴油锤 Diesel hammer	HD62 以下 Below
	振动锤（电动/液压）Vibra hammer	电Electro 90 KW / 液Hydraulic 80 T
主卷扬 Main winch	额定提升力 Rated lifting force (KN)	> 60 (Ø22钢丝绳 Wire rope）
	最大绳速 The maximum rope speed (m/min)	> 60
	有效容绳量 Effective capacity of rope (m)	> 90
副卷扬 Auxiliary winch	额定提升力 Rated lifting force (KN)	> 60 (F400桩 Pile)
	最大绳速 The maximum rope speed (m/min)	> 40
	有效容绳量 Effective capacity of rope (m)	> 70
整机总功率 Total power (KW)		112
桩架 Pile frame	立柱最大工作高度 Maximum working height of column (m)	22.7
	适用桩长 Applicable pile length (m)	14
	导轨直径 Guide diameter (mm)	102
	轨距 Track gauge (mm)	600
	扶梯 Escalator	单侧扶梯 One side
	运输状态 Transport status	可折叠 Collapsible
	立柱截面 Column cross section	矩形 Rectangle
	立柱前倾 Column bend forward (^。)	3
	立柱侧倾 Column bend side (^。)	3
底盘 chassis JV215	履带板宽 Track width (mm)	700
	节距 Pitch (mm)	190
	接地线长 Ground wire length (mm)	3558
整机接地比压 Ground pressure (KPa)		98
整机外形尺寸 Overall dimension	运输状态 Transportation status (L×W×H)(mm)	17550×3190×3390
整机外形尺寸 Overall dimension	工作状态 Working status (L×W×H)(mm)	6678×3190×21500