JVEU420-88_New Energy Full-Hydraulic Crawler Pile Driver_Construction Machinery _Products

Products

New Energy Full-Hydraulic Crawler Pile Driver

Home > Products > Construction Machinery > New Energy Full-Hydraulic Crawler Pile Driver > JVEU420-88

JVEU420-88

Product Search:

Tel: 0086-731-82398696 82398695
Fax: 0086-731-82398697
Mail: international@chtcjove.com

Features
Parameters

JVEU420-88 New Energy Full Hydraulic Crawler Pile Frame, is independent research and development by CHTC JOVE Heavy Industry Co.,Ltd, the international innovation new environmental protection pile foundation construction equipment. It combines the new technology and technology of modern hydraulic pile machinery, and uses the hybrid technology of new energy and electric drive. Its main performance parameters are up to the international advanced level, key components of international procurement, reliable performance of the whole machine. It can be equipped with long auger drill, core drill, dth hammer and other drilling tools. It can drill into clay layer, sand layer, cobble layer, medium weathering and rock layer. It is widely used in the construction of road, bridge and high-rise building, it is an ideal equipment for deep foundation engineering construction.

1. Using the hybrid technology of new energy and electric drive, it is an international innovative new type of environmental protection pile foundation construction equipment. Using exclusive special lithium battery and intelligent automatic charge and discharge control system, is a safe, efficient, environmental protection as one of the high cost-effective products;

2.high-strength flexible and reliable column, cylinder using high-standard high-strength materials, integral Flange, high standard processing technology, fully guarantee the interchangeability of each column. The lower end of the column is supported by a large triangular point which is hinged by the cross shaft structure and the upper diagonal bracing structure, so that the column can be tilted from left to right and from front to back. The lower end is arranged horizontally to push the oil cylinder, and the horizontal fine adjustment of the column can be easily realized.

3. the use of stand frame and inclined support multi-cylinder combination vertical mast, without the need for hoist and crane assistance.

4.The hoisting system is composed of four hoists: the main hoist, the auxiliary hoist, the Hoist 1 and the Hoist 2, in which the auxiliary hoist can realize the floating low speed control during drilling, meet the requirements of rock drilling and other special construction methods.

5,.advanced electro-hydraulic control system, using negative flow hydraulic control system, the selection of international well-known brands of hydraulic components, such as Kawasaki. Motor frequency converter and other electrical components are selected international famous brand products, high reliability, product quality more guaranteed.

6. cab spacious and beautiful, comfortable operation, simple and clear operation interface, clear division of operation area, the combination of Construction Operation Frequency and Ergonomics is fully considered.

项目Item		单位Unit	JVEU420-88
电动机（额定功率）Electric Motor(Rated Motor)		KW	160
后备电池Battery			《50kw工作working》1小时h
主卷扬 Main Winch	单绳速度Line Speed	m/min	80/40(有浮动钻孔功能With Floating Boring Functions)
	单绳拉力Line Pull	k/N	60
	钢绳直径Wire Rope Diameter	mm	20
	容绳量Capacity Rope Volume	m	270
副卷扬 Auxiliary Winch	单绳速度Line Speed	m/min	80/40(with floating boring functions)
	单绳拉力Line Pull	k/N	60
	钢绳直径Wire Rope Diameter	mm	20
	容绳量Capacity Rope Volume	m	270
吊卷扬1 Lifting Winch 1	单绳速度Line Speed	m/min	40(有自由落钩功能With Free Falling Hook Functions)
	单绳拉力Line Pull	kN	49
	钢绳直径Wire Rope Diameter	mm	20
	容绳量Capacity Rope Volume	m	150
吊卷扬2 Lifting Winch 2	单绳速度Line Speed	m/min	40
	单绳拉力Line Pull	kN	49
	钢绳直径Wire Rope Diameter	mm	20
	容绳量Capacity Rope Volume	m	150
立柱Mast	立柱长度Mast Length	m	18、21、24、27（Non-Slewing）
	立柱直径Mast Diameter	mm	Ҩ610
	主滑轨规格Main Slideway Diemension	mm	Ҩ102*600
	副滑轨规格Auxiliary Slideway Diemension	mm	Ҩ70*330
	前后倾角Forward/Backward Inclination	°	+5
	左右倾角Lateral inclination	°	+1.5
	允许最大提升力Max.Lifting force	kN(t)	412（42）
履带底盘 Chassis Parameters	履带最大展宽Max.Crawler Width	mm	4580
	履带收缩宽度 Crawler Shrinkage Width	mm	3320
	履带板宽度 Track Shoe Width	mm	780
	履带长度 Crawler Length	mm	5722
	两履带轮中心距 Crawler Center Distance	mm	4878
	行走速度Walking Speed	Km/h	0.6-1.2
	上车回转速度Rotating Speed	r/min	1.6(回转角度 Rotating Angle360°)
	爬坡能力Grade Ability	。	约Approx.21.8(40%)(仅限机体、无立柱、无斜撑、无配重)Machine Body Only.No Mast/Inclined Strut/Counter weight
外形尺寸Overall Dimension	工作状态Working Dimension	m	约Approx.11.64.5828.9
配重质量Counter Weight		t	3.8-12
机体质量Total Machine Weight		t	47.76（No Mast/Inclined Strut/Counter Weight）
T整机允许最大行走重量Max. Walking Weight		t	88
接地面积Ground Area		m²	7.3
接地比压Ground Pressure		Mpa	0.121